vizimax.com

  • Increase font size
  • Default font size
  • Decrease font size

Smart Plug-ins

Up to 19 communications ports… and counting!

The RightWON supports a complete range of connection possibilities for efficient communication between remote site units, their attached equipment and the Internet. Smart plug-ins are provided to support specific physical interface requirements. They operate independently and are individually programmable. Flexible gateway functions handle protocol conversion, secure data transfer (IPsec, VPN), multicast IP routing and transparent access to intelligent end devices (IEDs).

RightWon Plug-ins
Other recent modules
  • 3G Modem
  • Wireless Modem -40°C
  • PSTN Modem -40°C
  • 3-ports plug-in : 1 x isolated RS422/485 + 1 x isolated RS232 + 1 x 100 base-TX Ethernet + System relay (1 x SSR Output)
  • Ethernet 100 base-FX (Fiber optic) : Single-mode and Multi-mode plug-ins
  • Remote access is made possible through the RightWON’s networking, security and telecommunications capabilities and compatibility with a wide range of industrial protocols. Smart plug-ins support a variety of communication types (IP, GSM, telephone, radio, etc.), direct machine-to-machine interface in transparent mode, and web based site monitoring and management.

    The attractiveness of the RightWON solution is its flexible and economical approach − ideal for businesses with a small number of sites, yet scalable to the needs of the large enterprise. Where there are many remote sites to manage, or for business-wide reporting, graphs, event summaries and workforce roster management, the FRONTAL software can be installed on a supervisory PC to create a virtual central site, hosted by Vizimax and accessible from anywhere via Internet.

    Any type of smart plug-in can be installed in any of the 3 slots on the CPU and MCU.


    PSTN Modem: RJ-11 port for RTC modem connection to a Public Switched Telephone Network
    GSM Mode

    GSM port with antenna for wireless modem connection to a Global Systems Mobile network

    CDMA Modem: CDMA port with antenna for wireless modem connection to a Code Division Multiple Access networ
    Serial WAN: 1 or 2 RS232/422/485 ports for serial connection to a Wide Area Network
    Ethernet LAN (copper CAT5): RJ-45 port for copper CAT5 connection (10/100baseT) to an Ethernet Local Area Network
    Ethernet LAN (F.O.): 2 ST Bayonet ports for fiber optic connection (100FX) to an Ethernet LAN
    Analog and Digital I/Os: 2 analog/digital I/O ports for direct connection to industrial equipment


    PSTN Modem
    Provides 1 RJ-11 port for RTC modem connection to a Public Switched Telephone Network. DOC insulation.

    Back to top

    PSTN modem smart plug-in

    GSM Modem
    Provides 1 GSM port with coaxial connector and antenna for wireless modem connection to a Global Systems Mobile network. Supports GSM for North America GSM, GPRS, EDGE compatible.

    Back to top

    GSM modem smart plug-in

    CDMA Modem
    Provides 1 CDMA port with coaxial connector and antenna for wireless modem connection to a Code Division Multiple Access network. Supports CDMA for North America.

    Back to top

    CDMA modem smart plug-in

    Serial Link
    Provides 1 or 2 RS232/422/485 ports for serial connection to a Wide Area Network. Serial ports are configurable as follows:

    • RS232 serial DTE, DB9M connector (terminal block on request)
    • RS422 serial multi-drop, DB9M connector (terminal block on request)
    • RS485 serial multi-drop, DB9M connector (terminal block on request)
    Supports numerous standard and proprietary protocols: DNP3, BACnet, Modbus, IEC61850, IEC 60870, numerous PLC and controller protocols.

    Back to top

    Serial WAN smart plug-in


    Dual serial WAN smart plug-in

    Ethernet LAN (copper CAT5)
    Provides 1 RJ-45 port for copper CAT5 connection to an Ethernet LAN, 10baseT or 100baseTX, with 500V insulation. High-speed Ethernet (100 Mbps) available when installed in the CPU or first MCU; other slots support 12 Mbps maximum.

    Supports TCP/IP communications, switched access (PPP), IP RIP routing, VPN, and 2 IP addresses for communication redundancy.

    Supports numerous standard and proprietary protocols: DNP3, BACnet, Modbus, IEC61850, IEC 60870, numerous PLC and controller protocols. Real-time data exchanged using an event-driven protocol over TCP-IP.

    Back to top

    Ethernet LAN smart plug-in

    Ethernet LAN (F.O.)
    Provides 2 ST Bayonet ports for fiber optic connection to an Ethernet LAN, 100base-FX, 1300 nm. Supports TCP/IP communications, switched access (PPP), IP RIP routing, VPN, and 2 IP addresses for communication redundancy.

    Supports numerous standard and proprietary protocols: DNP3, BACnet, Modbus, IEC61850, IEC 60870, numerous PLC and controller protocols. Real-time data exchanged using an event-driven protocol over TCP-IP.

    Back to top

    thumb_RightWON-1494

    Analog and Digital I/Os
    Analog & digital I/O ports for direct connection to industrial equipments

    Cabling system: DIN rail terminal blocks with screws

    Available in several formats:

    • 16IN/8O Relay
    • 14IN/6O Relay/2Analog IN
    • 12IN/4O Relay/4Analog IN
    • 8IN/4O Relay
    • 6IN/2O Relay/2Analog IN

    Back to top

    A/D I/O smart plug-in
 
Interested in Knowing More About our RightWON System?

Please provide your contact information in this box to receive our free WHITE PAPER on the RightWON system. We will also periodically send you information on Remote Automation applications and products; if you feel we overdo it, you can unsubscribe at any time!

Note : We hate spam! We won't share, show, rent or sell your e-mail address or information to any third party, ever.

Are  you  an  Integrator or Distributor?